Stainless steel is the abbreviation of stainless and acid-resistant steel. Steels that are resistant to weak corrosive media such as air, steam, and water or have rust resistance are called stainless steels; and steels that are resistant to chemical corrosion media are called acid-resistant steels. It has a good production process
Stainless steel is the abbreviation of stainless and acid-resistant steel. Steels that are resistant to weak corrosive media such as air, steam, and water or have rust resistance are called stainless steels; and steels that are resistant to chemical corrosion media are called acid-resistant steels. It has a good production process, but it will be difficult to cut during the production process. Let me introduce the reasons for the difficult cutting:
1. If the strength of the material itself is relatively large, the two-way resistance during the cutting process will be increased, and the cutting degree can also be increased.
2. When we are in the process of processing and cutting, because of the greater plastic deformation of the elongation product, it also brings certain difficulties to the processing and production.
3. Stainless steel is easy to expand, so it will generate a lot of heat during the cutting process, resulting in a bad reaction, leading to expansion, and increasing the difficulty of cutting.
4. High cutting temperature will affect. The product will generate high heat during the cutting process, but the material has poor thermal conductivity, so all the heat is concentrated on the cutting area and the blade, and it is not easy to dissipate heat.
5. The product is a hard material that is difficult to cut, with good plasticity and toughness. However, when we are processing, the cutting is not so easy to break, but it is easy to stick, which leads to cutting and extruding the stainless steel surface and excessive wear of the tool.
When stainless steel processing is made, it is inevitable that the cutting technology will be poor due to errors or other reasons. Therefore, in order to ensure the quality of the processed parts, the staff must first understand the problems that are prone to occur in the process before cutting to ensure their quality. Stainless steel itself has good corrosion resistance, and stainless steel can still maintain its excellent physical and mechanical properties at high temperatures. It is also widely used in the field of 3D printing.
